Français
Español 
Català 
Deutsch 
Português 
Italiano 
Turkish 
Czech 
English 
Chinese-Simplified 
Développer pour un milieu en haute pression et cycle très rapide.
Butée mécanique interne afin de supporter la pression d’injection et d’éviter tout blocage.
Anti rotation pour surface ondulé.
Bague d’ajustement afin d’affiner la hauteur et la facilité du démontage.
Read moreShow less
Butée mécanique interne afin de supporter la pression d’injection et d’éviter tout blocage.
Anti rotation pour surface ondulé.
Bague d’ajustement afin d’affiner la hauteur et la facilité du démontage.
Can I remove the valve from the tool?
Yes, on our catalogo page we indicate the size of the hole (E dimension) to be made before installing, the valve can then be removed using the appropiate ejector.
On the smaller diametres (6) extra care needs to be taken to remove the part slowly, knocking softly to avoid damage to the internal mechanisms.
On the smaller diametres (6) extra care needs to be taken to remove the part slowly, knocking softly to avoid damage to the internal mechanisms.
Is there any limitation on the position of the valves in the mold?
The valve should not be installed below the injection point. In that position the high temperatures and pressure could negatively influence the valve components and decrease their lifetime.
