English
Español 
Català 
Deutsch 
Português 
Français 
Italiano 
Turkish 
Czech 
Chinese-Simplified 
Brass bushing with an inner O’ring to prevent air loss when the vacuum is being made.
With clamping tolerance.
Incorporates a thread allowing removal of the bushing if needed.
Read moreShow less
With clamping tolerance.
Incorporates a thread allowing removal of the bushing if needed.
Where can I find a Vacuumjet System user manual?
Download here the NEW User Manual for the Vacuumjet System!
Must I apply the CV’s upon all ejectors?
We recommend to apply the CV to all the ejector pins, even if they are not connected to the Vacuum channel.
What is the maximum working temperature?
100ºC (212ºF). The customer can replace the NBR o'rings by Viton o'rings to use the product in higher temperatures.
If the vacuum is made through the ejectors, should they have a different tolerance?
Yes, -0.03mm (-0.0011”) to -0.04mm (-0.0016”), keeping in mind that the housing is H7, and depending on the viscosity of the plastic.
