English
Español 
Català 
Deutsch 
Português 
Français 
Italiano 
Turkish 
Czech 
Chinese-Simplified 
The ejector base unit is an automatic unit which holds the ejector pin in position until the top is actuated.
The pins can be taken out from the front of the tool.
There is no requirement for strip down when repair or maintenance is needed.
Read moreShow less
The pins can be taken out from the front of the tool.
There is no requirement for strip down when repair or maintenance is needed.
- BE031115: 2550N / 260Kg (572.52lb)
- BE041216: 2550N / 260Kg (572.52lb)
- BE051317: 3800N / 387Kg (852.17lb)
- BA/BT061418: 3800N / 387Kg (852.17lb)
- BA/BT081620: 5100N / 520Kg (1145.04lb)
- BA/BT101822: 6400N / 652Kg (1435.70lb)
- BA/BT122024: 7600N / 775Kg (1706.55lb)
What is the maximum temperature that the ejector bases can withstand?
Can work up to 150 °C (302°F). This is the temperature when the interior spring could lose effectivity.
What is the retention strength of the pin?
How much load is needed to release the ejectors from the bases by pressing the brass bushing?
49.03N /5Kg (11.01lb).
