GR283432-10
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
GR283432-15
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
GR344038-10
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
GR344038-15
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
GR424546-10
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
GR424546-15
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
GR465050-10
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
GR465050-15
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to accept this unit. The unit comes in either 10°or 15°.
This unit incorporates a predrilled hole for the angle pin which eliminates the need to...
This unit incorporates a predrilled hole for the angle pin which eliminates the need to angularly drill the die set. The die set only needs to be drilled from the front to...
MB122056
An unique unit hardened and ground with the adjustment tolerances. Has various assembly posibilities and it is also easy to change.
An unique unit hardened and ground with the adjustment tolerances. Has various assembly...
An unique unit hardened and ground with the adjustment tolerances. Has various assembly posibilities and it is also easy to change.
MB202056
An unique unit hardened and ground with the adjustment tolerances. Has various assembly posibilities and it is also easy to change.
An unique unit hardened and ground with the adjustment tolerances. Has various assembly...
An unique unit hardened and ground with the adjustment tolerances. Has various assembly posibilities and it is also easy to change.
MC121252
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine...
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
MC121652
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine...
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
MC201252
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine...
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
MC201652
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine...
Ready to machine, it comes with adjustment tolerances. It is only necessary to machine the cavity area.
MG121648
Includes the angle pin and a pressure regulator with an integrated locking system, which allows, in few seconds, mold closed adjusting with only an hex key.
Includes the angle pin and a pressure regulator with an integrated locking system,...
Includes the angle pin and a pressure regulator with an integrated locking system, which allows, in few seconds, mold closed adjusting with only an hex key.
MG201648
Includes the angle pin and a pressure regulator with an integrated locking system, which allows, in few seconds, mold closed adjusting with only an hex key.
Includes the angle pin and a pressure regulator with an integrated locking system,...
Includes the angle pin and a pressure regulator with an integrated locking system, which allows, in few seconds, mold closed adjusting with only an hex key.
MS121503
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone mechanized by the customer and its ±0.5mm. horizontal and vertical movement.Just needs 1 screw on the ejection side of the mold and 2 on the injection side, which simplifies and make the installation and also the maintenance really fast.The molding insert is easily disassembled so that the customer can simply machine it.The Turcite® wear plate eliminates the...
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone...
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone mechanized by the customer and its ±0.5mm. horizontal and vertical movement.Just needs 1 screw...
MS182006
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone mechanized by the customer and its ±0.5mm. horizontal and vertical movement.Just needs 1 screw on the ejection side of the mold and 2 on the injection side, which simplifies and make the installation and also the maintenance really fast.The molding insert is easily disassembled so that the customer can simply machine it.The Turcite® wear plate eliminates the...
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone...
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone mechanized by the customer and its ±0.5mm. horizontal and vertical movement.Just needs 1 screw...
MS242608
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone mechanized by the customer and its ±0.5mm. horizontal and vertical movement.Just needs 1 screw on the ejection side of the mold and 2 on the injection side, which simplifies and make the installation and also the maintenance really fast.The molding insert is easily disassembled so that the customer can simply machine it.The Turcite® wear plate eliminates the...
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone...
Its innovative floating insert, perfectly fits on the cavity due to the 10º cone mechanized by the customer and its ±0.5mm. horizontal and vertical movement.Just needs 1 screw...
PO120320
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
Optional method for holding the Slide Retainer, that simplifies the disassembling. This...
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
PO150425
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
Optional method for holding the Slide Retainer, that simplifies the disassembling. This...
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
PO200530
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
Optional method for holding the Slide Retainer, that simplifies the disassembling. This...
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
PO250635
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
Optional method for holding the Slide Retainer, that simplifies the disassembling. This...
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
PO340850
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
Optional method for holding the Slide Retainer, that simplifies the disassembling. This...
Optional method for holding the Slide Retainer, that simplifies the disassembling. This item must be ordered separately.
RA163812
This retainer for large slides is actuated by the angle pin, ensuring smooth and easy movement with no excess force required.
This retainer for large slides is actuated by the angle pin, ensuring smooth and easy...
This retainer for large slides is actuated by the angle pin, ensuring smooth and easy movement with no excess force required.
RC123006
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
RC164008
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
RC205010
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
RC246012
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
RC328012
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
RC328016
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
Easy and useful, this unit needs minimum space for installation and access.
RCM163808
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction surfaces. Less machining for installation compared to similar products on the market. Minimum space required for installation.
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction...
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction surfaces. Less machining for installation compared to similar products on the market....
RCM204810
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction surfaces. Less machining for installation compared to similar products on the market. Minimum space required for installation.
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction...
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction surfaces. Less machining for installation compared to similar products on the market....
RCM245712
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction surfaces. Less machining for installation compared to similar products on the market. Minimum space required for installation.
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction...
Incorporates a mechanical stopper. The fixing pin has rollers to avoid wear on friction surfaces. Less machining for installation compared to similar products on the market....
SU081220
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made from two different inserts.All machining can be made 90° to parting line.Easy to change insert with dovetail system. Incorporates a slide retainer and an angle pin.
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made...
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made from two different inserts.All machining can be made 90° to parting line.Easy to change...
SU121626
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made from two different inserts.All machining can be made 90° to parting line.Easy to change insert with dovetail system. Incorporates a slide retainer and an angle pin.
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made...
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made from two different inserts.All machining can be made 90° to parting line.Easy to change...
SU162032
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made from two different inserts.All machining can be made 90° to parting line.Easy to change insert with dovetail system. Incorporates a slide retainer and an angle pin.
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made...
Ideal for de-molding external details.Compact unit with strokes up to 5mm.Slide is made from two different inserts.All machining can be made 90° to parting line.Easy to change...
UA363616
This unit uses the open and close movement of the mold to make lateral holes in wall sections of plastic parts. Easy to assemble and remove from the mold.
This unit uses the open and close movement of the mold to make lateral holes in wall...
This unit uses the open and close movement of the mold to make lateral holes in wall sections of plastic parts. Easy to assemble and remove from the mold.
UC325445
Mechanism to make lateral holes, automatic retention for the core insert. Requires very small area for installation.
Mechanism to make lateral holes, automatic retention for the core insert. Requires very...
Mechanism to make lateral holes, automatic retention for the core insert. Requires very small area for installation.